Printers
A small Bluetooth thermal printer turns MysterSmith's information into a physical prediction: the spectator's word in handwriting, their signature, the playing card they named, their drawing, an A.I. drawing, a whole designed page — printed in a few seconds, in your pocket or on the table.
Printing needs the Printers add-on (included in every subscription). Test prints are free, so you can try your printer before you buy.
Supported printers
| In the app | Models |
|---|---|
| Glyphs/Peripage | A6, P21, P21 HD, P21+, PeriPage+, A9 MAX, A2, A9s MAX, A40, A40+, P81 (A4, Android only), A3X |
| Cosmos/L2 | Cosmos, L2, LuckJingle D1 |
| Pitata Printer | Pitata Printer, Pitata Printer Mini (57mm) |
| Cat printer | GB03, MX10, MXW01, X6, X18 |
| Temu printer | YHK printers (X6, X10) |
| Paperang printer | Paperang, P3S (80mm) |
Connecting
- MY DEVICES → Enable/disable BT devices → Manage: switch on your printer type (in the Printers group).
- Turn on the printer, and tap Connect next to it in MY DEVICES. Pick your printer from the list.
- When it's connected, its name and Settings appear. Tap the printer's name to feed 5 mm of paper — a quick check that it's alive.
Peripage on Android
Under the Peripage row there is Peripage paired mode (Android only): it connects through classic Bluetooth instead of BLE. On Android this is the recommended way for Peripage printers. It is one setting for all your Peripage printers.
The printer's settings panel
Tap Settings next to the connected printer. (Tap the printer's name at the top for the DEVICE INFO: battery level, firmware, dpi.)
SETTINGS (Glyphs/Peripage has the most; the others have the margins, the paper feed and the action):
- Printing speed (Peripage: automatic, official Peripage app, Glyphs (experimental), safe, basic; Cosmos: safe / basic)
- Print density (Peripage: model default, light, medium, dark) and Print mode (text (sharp) or photo (dithered) — photo is gentler on the print head)
- Canvas width, Paper width
- Top margin, Bottom margin (0–50 mm), Bottom paper feed (mm) (default 10)
- Dotted margins when testing, Extra paper feed after printing
- Action after printing finished + Trigger action — runs when the printing is done (e.g. vibrate short — so you know you can take the paper out).
TESTING — test prints (free, also without the add-on): page size, handwriting, signature, doodle drawing, playing card, clock prediction, dice, magic square, and Feed paper (10mm), Cancel printing.
CUSTOMIZE PRINTING — the look of each print type: Handwriting / text, Signature, Doodle (drawings), Playing cards, Magic square, Clock (time), Dice. Each has a live preview, and the settings for the font (family, size, line height, thickness), the position (print area height, orientation, alignment, padding, rotation) and a background image.
Peripage A6 on new iPhones
On iPhone 17 and newer an A6 may freeze while printing. Set Print density to light and Print mode to photo.
What you can print
The Printer group of the action picker (the Printer chip jumps there):
| Action | Prints |
|---|---|
| handwriting to printer | the current Text Buffer text, in handwriting |
| signature to printer | the text as a signature |
| playing card to printer | a playing card |
| clock to printer | a clock face with the time |
| magic square to printer | a magic square for the number |
| doodle drawing to printer | the drawing on the Doodle screen |
| last photo to printer | the newest photo of your gallery |
| image buffer to printer | the current Image Buffer image (an A.I. drawing, for example) |
| image template to printer | an image template, filled in |
| feed paper 5mm / 25mm | blank paper |
These go to the connected printer. While a printer is connected, its own group appears too (e.g. Glyphs/Peripage printer), with the same prints — plus dice.
Photos and images are printed dithered (in fine dots), so they look good on thermal paper.
Typical routines
- Action after text recognition → handwriting to printer — the spectator writes a word, and your "prediction" prints in your handwriting style.
- Action after OpenAI drawing → image buffer to printer — the A.I. drawing of their word is printed.
- Wait for the third word with a Condition.
From other apps: imagetemplate=N prints an image template (see HTTP Socket).